Angebote zu "Controller" (44 Treffer)

Yuneec GPS Tracking Fernsteuerung »Wizard Stick...
219,00 €
Reduziert
179,00 € *
zzgl. 6,95 € Versand

Yuneec Typhoon Wizard - GPS-Flug-Controller Der Wizard ist ein kleines GPS Tracking Gerät, welches - sobald es in der Hand gehalten wird – volle Flugkontrolle über Ihren TYPHOON Multikopter verleiht. Durch sein kompaktes Design und innovative Features, eröffnet er neue Möglichkeiten großartige Aufnahmen von Fotos und Videos für eine Vielzahl von Anwendungen zu machen. Funktionen wie ´´Follow Me” und ´´Watch Me” stellen sicher, dass Sie immer im Bild bleiben. Die Point-To-Fly Funktion erlaubt durch einfaches Zeigen und Klicken den TYPHOON Multikopter in einer intuitiven Art neu zu positionieren. Mit dem Wizard wird die Steuerung von Fotos und Videos aus der Luft so einfach wie nie zuvor. Mit dem Wizard deuten Sie nur noch auf einen Punkt - der Multikopter fliegt diesen dann an. Steuern lassen sich mit dem Wizard die Multikopter von Yuneec Q500, Q500G, Q500+ und Q500 4K. Wasserfestes Befestigungsband Der TYPHOON Wizard GPS Flug Controller wird zusammen mit einem wasserfesten Befestigungsband geliefert, welches die Unterbringung des Wizard in Actiongeladenen Momenten vereinfacht, falls mal keine Tasche zum Verstauen zur Verfügung steht. Kompatible Multikopter Q500 Q500G Q500+ Q500 4K Kompatible Kameras CGO2-GB CGO2+ CGO3 Akku Typ: LiPo, integriert Spannung / Kapazität: 3,7 V / 500 mAh Betriebszeit: bis zu 3,5 Std. Produktdaten Gewicht (inkl. LiPo Akku): ca 71,5 g Abmessungen (B x H x T): ca 13,9 x 3,7 x 2,5 cm Lieferumfang 1 x TYPHOON Wizard GPS Flug Controller 1 x Wasserfestes Befestigungsband

Anbieter: Schwab
Stand: 12.09.2019
Zum Angebot
Yuneec GPS Tracking Fernsteuerung »Wizard Stick...
219,00 €
Rabatt
179,00 € *
zzgl. 6,95 € Versand

Yuneec Typhoon Wizard - GPS-Flug-Controller Der Wizard ist ein kleines GPS Tracking Gerät, welches - sobald es in der Hand gehalten wird ? volle Flugkontrolle über Ihren TYPHOON Multikopter verleiht. Durch sein kompaktes Design und innovative Features, eröffnet er neue Möglichkeiten großartige Aufnahmen von Fotos und Videos für eine Vielzahl von Anwendungen zu machen. Funktionen wie ?Follow Me? und ?Watch Me? stellen sicher, dass Sie immer im Bild bleiben. Die Point-To-Fly Funktion erlaubt durch einfaches Zeigen und Klicken den TYPHOON Multikopter in einer intuitiven Art neu zu positionieren. Mit dem Wizard wird die Steuerung von Fotos und Videos aus der Luft so einfach wie nie zuvor. Mit dem Wizard deuten Sie nur noch auf einen Punkt - der Multikopter fliegt diesen dann an. Steuern lassen sich mit dem Wizard die Multikopter von Yuneec Q500, Q500G, Q500+ und Q500 4K. Wasserfestes Befestigungsband Der TYPHOON Wizard GPS Flug Controller wird zusammen mit einem wasserfesten Befestigungsband geliefert, welches die Unterbringung des Wizard in Actiongeladenen Momenten vereinfacht, falls mal keine Tasche zum Verstauen zur Verfügung steht. Kompatible Multikopter Q500 Q500G Q500+ Q500 4K Kompatible Kameras CGO2-GB CGO2+ CGO3 Akku Typ: LiPo, integriert Spannung / Kapazität: 3,7 V / 500 mAh Betriebszeit: bis zu 3,5 Std. Produktdaten Gewicht (inkl. LiPo Akku): ca 71,5 g Abmessungen (B x H x T): ca 13,9 x 3,7 x 2,5 cm Lieferumfang 1 x TYPHOON Wizard GPS Flug Controller 1 x Wasserfestes Befestigungsband

Anbieter: Schwab Versand
Stand: 27.08.2019
Zum Angebot
NAVILOCK 62884 - MD6 Buchse ser. > 5 x offene K...
14,35 € *
zzgl. 5,95 € Versand

Dieses Anschlusskabel von Navilock wandelt die seriellen Signale an allen MD6 Empfängern in die TTL 5 V Signale um. Kompatibel mit TTL/CMOS, eignet sich diese I/O Schnittstelle für GPIO, UART, Controller und CPU. Technische Daten • Anschlüsse: 1 x MD6 Buchse> 1 x 5 Pin offene Kabelenden • Chipsatz: ASIX ZT3221LEEY • Datenübertragung: bidirektional • Drahtquerschnitt: 28 AWG • Spannung: 5 V • Kabelfarbe: schwarz • Kabellänge inkl. Anschlüsse: ca. 52 cm Systemvoraussetzungen • Ein serieller Navilock MD6 GNSS Empfänger Packungsinhalt • Anschlusskabel für GNSS Empfänger • Navilock Support CD Verpackung • Poly Bag

Anbieter: reichelt elektronik
Stand: 05.09.2019
Zum Angebot
STM32 F103RCT6 - ARM®Cortex®-M3 Mikrocontroller...
5,50 € *
zzgl. 5,95 € Versand

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN. The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC. herals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC. Key Features Core: ARM® 32-bit Cortex®-M3 CPU -72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -256 to 512 Kbytes of Flash memory -up to 64 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC with calibration -32 kHz oscillator for RTC with calibration Low power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3×12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Triple-sample and hold capability -Temperature sensor 2×12-bit D/A converters DMA: 12-channel DMA controller -Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex®-M3 Embedded Trace Macrocell™ Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Up to 11 timers -Up to 4x16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2 × 16-bit motor control PWM timers with dead-time generation and emergency stop -2 × watchdog timers (Independent and Window) -SysTick timer: a 24-bit downcounter -2 × 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 × I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) -Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full speed interface -SDIO interface CRC calculation unit, 96-bit unique ID ECOPACK® packages

Anbieter: reichelt elektronik
Stand: 17.09.2019
Zum Angebot
STM32F103ZGT6 - ARM®Cortex®-M3 Mikrocontroller,...
11,65 € *
zzgl. 5,95 € Versand

The STM32F103xF and STM32F103xG performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1Mbytes and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer 3x12-bit ADCs, ten general purpose 16-bit timers plus 2xPWM timer, as well as standard and advanced communication interfaces: up to 2x I2Cs and 3x SPIs, 2x I2Ss, 1x SDIO, 5x USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom. Key Features ARM®32-bit Cortex®-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -768 Kbytes to 1 Mbyte of Flash memory -96 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3 x 12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Tripple-sample and hold capability -Temperature sensor 2 × 12-bit D/A converters DMA -12-channel DMA controller -Peripherals supported: timers, ADC, DAC, SDIO, SPIs, I2Cs and USARTs Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex® -M3 Embedded Trace Macrocell™ Up to 17 timers -Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2x16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter -2× 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 3 SPIs (18 Mbit/s)2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID ECOPACK®

Anbieter: reichelt elektronik
Stand: 20.09.2019
Zum Angebot
STM32F103VGT6 - ARM®Cortex®-M3 Mikrocontroller,...
9,85 € *
zzgl. 5,95 € Versand

The STM32F103xF and STM32F103xG performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1Mbytes and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer 3x12-bit ADCs, ten general purpose 16-bit timers plus 2xPWM timer, as well as standard and advanced communication interfaces: up to 2x I2Cs and 3x SPIs, 2x I2Ss, 1x SDIO, 5x USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom. Key Features ARM®32-bit Cortex®-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -768 Kbytes to 1 Mbyte of Flash memory -96 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3 x 12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Tripple-sample and hold capability -Temperature sensor 2 × 12-bit D/A converters DMA -12-channel DMA controller -Peripherals supported: timers, ADC, DAC, SDIO, SPIs, I2Cs and USARTs Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex® -M3 Embedded Trace Macrocell™ Up to 17 timers -Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2x16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter -2× 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 3 SPIs (18 Mbit/s)2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID ECOPACK®

Anbieter: reichelt elektronik
Stand: 17.09.2019
Zum Angebot
STM32F103RGT6 - ARM®Cortex®-M3 Mikrocontroller,...
9,85 € *
zzgl. 5,95 € Versand

The STM32F103xF and STM32F103xG performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1Mbytes and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer 3x12-bit ADCs, ten general purpose 16-bit timers plus 2xPWM timer, as well as standard and advanced communication interfaces: up to 2x I2Cs and 3x SPIs, 2x I2Ss, 1x SDIO, 5x USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom. Key Features ARM®32-bit Cortex®-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -768 Kbytes to 1 Mbyte of Flash memory -96 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3 x 12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Tripple-sample and hold capability -Temperature sensor 2 × 12-bit D/A converters DMA -12-channel DMA controller -Peripherals supported: timers, ADC, DAC, SDIO, SPIs, I2Cs and USARTs Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex® -M3 Embedded Trace Macrocell™ Up to 17 timers -Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2x16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter -2× 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 3 SPIs (18 Mbit/s)2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID ECOPACK®

Anbieter: reichelt elektronik
Stand: 17.09.2019
Zum Angebot
STM32F103RET6 - ARM®Cortex®-M3 Mikrocontroller,...
5,10 € *
zzgl. 5,95 € Versand

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN. The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC. Key Features Core: ARM® 32-bit Cortex®-M3 CPU -72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -256 to 512 Kbytes of Flash memory -up to 64 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC with calibration -32 kHz oscillator for RTC with calibration Low power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3×12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Triple-sample and hold capability -Temperature sensor 2×12-bit D/A converters DMA: 12-channel DMA controller -Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex®-M3 Embedded Trace Macrocell™ Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Up to 11 timers -Up to 4x16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2 × 16-bit motor control PWM timers with dead-time generation and emergency stop -2 × watchdog timers (Independent and Window) -SysTick timer: a 24-bit downcounter -2 × 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 × I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) -Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full speed interface -SDIO interface CRC calculation unit, 96-bit unique ID ECOPACK® packages

Anbieter: reichelt elektronik
Stand: 17.09.2019
Zum Angebot
STM32F103VCT6 - ARM®Cortex®-M3 Mikrocontroller,...
4,70 € *
zzgl. 5,95 € Versand

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN. The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC. Key Features Core: ARM® 32-bit Cortex®-M3 CPU -72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -256 to 512 Kbytes of Flash memory -up to 64 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC with calibration -32 kHz oscillator for RTC with calibration Low power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3×12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Triple-sample and hold capability -Temperature sensor 2×12-bit D/A converters DMA: 12-channel DMA controller -Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex®-M3 Embedded Trace Macrocell™ Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Up to 11 timers -Up to 4x16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2 × 16-bit motor control PWM timers with dead-time generation and emergency stop -2 × watchdog timers (Independent and Window) -SysTick timer: a 24-bit downcounter -2 × 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 × I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) -Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full speed interface -SDIO interface CRC calculation unit, 96-bit unique ID ECOPACK® packages

Anbieter: reichelt elektronik
Stand: 17.09.2019
Zum Angebot